There are many types of cables, and the website cannot display all of them. We have most cables in stock, and special cables can be customized. If you have any cable needs, please contact us.

Structure
1.    Conductor - Plain annealed class 2 stranded (compacted) copper
2.    Insulation - Cross linked polyethylene (XLPE)
3.    Filler - Non-hygroscopic material
4.    Binder tape - Non-hygroscopic material tape
5.    Inner sheath - Polyvinyl chloride compound (PVC)
6.    Armor - Galvanized steel wires
7.    Binder tape - Non-hygroscopic material tape
8.    Outer sheath - Polyvinyl chloride compound (PVC)

Application
To be used for main power supply such as in low voltage distribution power networks, indoor and outdoor areas. It can be installed in ducts, in dry or wet locations, recommended for direct burial where require higher electrical and mechanical protection.

Temperature characteristics                 
Conductor operating temperature: -15ºC~90ºC                  
Min. temperatrue laying condition: 0ºC                 
Conductor emergency operating temperature: 105ºC
Conductor short-circuit operating temperature (5s): 250ºC
 
Electrical Characteristics
Rated voltage: 0.6/1 (1.2) kV
High voltage test: 3.5kV / 5min
 
Color
Insulation: According to customer requirements
Outer sheath: Black or according to customer requirements
 
Standard
Cable design: IEC 60502-1 or AS/ZNS 5000.1
Conductor: IEC 60228 or AS/ZNS 1125

There are many types of cables, but the website demonstration is limited. If you need any cable, please contact us and we accept customization.